Any suggestions on the best way to configure our system for wireless
connections to our Novell servers?

We have:

NW 6 SP5 server named PCL this is our main file server
(192.168.0.1 Subnet 255.255.255.0 GW 192.168.0.15)

NW 6 SP5 server named WEB used for GroupWise WebAccess with two NICs
(192.168.0.16 Subnet 255.255.255.0 GW 192.168.0.15)
(xxx.xxx.xx.151 Subnet xxx.xxx.xx.128 GW xxx.xxx.xx.129)

NW 6 SP5 server named iFile used for NetStorage with two NICs
(192.168.0.17 Subnet 255.255.255.0 GW 192.168.0.15)
(xxx.xxx.xx.149 Subnet xxx.xxx.xx.128 GW xxx.xxx.xx.129)

MS 2000 server (192.168.0.33 Subnet 255.255.255.0 GW 192.168.0.15)

Symantec 300R Security Gateway Device (192.168.0.15) which hands out IP
addresses to our wired clients

Our Internet access comes through a fiberoptic provider with a CAT 5
connection to our main switch via the Symantec device, we have 5 static
ip addresses 2 of which are currently being used (for GW WebAccess and
NetStorage)

Linksys WRVS4400N Wireless-N Gigabit Security Router with VPN
This device was recently donated to us and has yet to be configured