Hello,
I have a Dell PE2850 Server using Qlogic 2342 HBA's (BIOS 1.47)
connected to a recently installed new Dell/EMC Clariion CX300. I am
using Qlogic's web site downloaded QL2300.HAM and QL2300.CDM files on my
OES NW65SP4 server. I am using PowerPath and NaviShere agents. I have
read through the threads here and see it mentioned where another person
is having the long "Scanning for Devices" situation, and mine takes about
10 minutes of delay before mounting too. The server boots and mounts the
local NSS SYS volume without the delay if not connected to the SAN. So I
would like to know what the MAX_LUNS specific syntax is and what other
steps it takes to get my SAN volumes to mount faster.

C:\NWSERVER\STARTUP.NCF load line:

LOAD QL2300.HAM SLOT=201 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED
LOAD QL2300.HAM SLOT=202 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED

Thanks,
Scott