hello, I thus do not speak very quite English sorry for the faults. I
encounter a problem with a node in a cluster with 2 node in bladecenter

Failover on HBA is ok and it runs.
Cluster failover, ressource migration is ok
Failover on ethernet is not ok

In fact, I use Novell's fault tolerance with the 2 broadcom NIC (B57.LAN)
with default settings. I activate spanning tree and port fast in the
blade's Nortel switch.
When i unplug the active link, flow migrate on the second card and I
loose only on packets.
When I plug again the cable Number1, the link restart but after 5
minutes, the server down and start NIC and the node abends. I don't known
why failover back down the interface.

Thanks a lot for your help
best regards