Hi,
We are using an IBM SAN fast600 with 2 controlers. The servers are NetWare
6.5 sp5 with 1 adapter. Here's the Startup.ncf file:
SET MULTI-PATH SUPPORT = ON
LOAD ACPIDRV.PSM
LOAD IDECD.CDM
LOAD SCSIHD.CDM
LOAD BAKPLANE.CDM
LOAD IDEATA.HAM SLOT=10006
LOAD LSIMPTNW.HAM SLOT=10011
LOAD QL2X00.HAM SLOT=1 /LUNS /ALLPATHS /PORTNAMES

Is this the right config? Should I use LSIMPE.CDM? Should I use
BAKPLANE.CDM?

Thanks