HI

I am trying to connect 2 Netware 6.5 sp5 servers to our HP EVA5000 SAN. I
have installed the HBA's Qlogic QLA2340. I have presented a Vdisk and set
up the STARTUP.NCF as below

#SET MULTI-PATH SUPPORT=ON
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD SCSIHD.CDM AEN
#LOAD CPQSHD.CDM
LOAD IDECD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10009
LOAD CPQRAID.HAM SLOT=10016
LOAD QL2X00.HAM SLOT=3 /LUNS /QUALIFIED
LOAD QL2X00.HAM SLOT=4 /LUNS /QUALIFIED
######## End HAM Drivers ########
LOAD KEYB.NLM United Kingdom
LOAD CHARSET.NLM CP850

I am getting the following on the server when I: LIST DEVICES

0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
0x0005: [V504-A2-D0:0] COMPAQ LOGICAL VOLUME f/w:2.56 [HDD]
0x000C: [V597-A3-D0:0] Unbound Device Object
0x000D: [V597-A3-D0:1] COMPAQ HSV110 (C)COMPAQ f/w:3010 [HDD]
0x000F: [V025-A1-D0:0] COMPAQ CD-ROM SN-124 N104 [CD]

Although I can see the Vdisk and configure with NSSMU I am getting
the "Unbound Device Object"

Can anyone point me in the right direction

Thanks

Brian