Take a look at this TID:

http://support.novell.com/cgi-bin/se...?/10080373.htm

PASSTHROUGH has actually been working for me. The tid however suggests
otherwise.

taiss@crownltd.com.au wrote:

> Greets,
>
> Hopefully this is a quick question, and I'm missing something REALLY
> obvious ... but I'm going nuts and I figured I'd ask ...
>
> We're implementing NW65/sp2 with the full NDPS/iPrint solution and
> utilising the NDPSGW (since the HPGW is no longer supported by HP) ... so
> off I go, connect a HP LaserJet 4100/5n/2100tn/etc printer to the
> network, DHCP enabled w/ DDNS updates, printer's hostname is "prn-test-
> 01" and it dutifully registers onto the network (as confirmed by the
> config sheet and nslookup).
>
> So, I head into iMangler, create printer, follow the bouncing ball and
> out comes an NDPS print object ... with an LPR error.
>
> Go in, restart the object - no joy.
>
> So, look up the gateway configuration, and from reading a few TIDs,
> discover it's set up incorrectly. So, after reading a few more TID's and
> forum postings, I correct it to what I think it should be looking like:
>
> NDPSGW PA=PRN-TEST-01 PORT=LPR HOSTNAME=prn-test-01 PRINTERNAME=RAW
>
> ... but now I get:
>
> Printer State: Gateway Not Bound to Printer Agent
>
> ...
>
> I've tried setting up 3 other HP's - all with the same result. In case it
> was the dynamic DNS as an issue, I bound the printer to an IP address -
> no joy either.
>
> What the prairie-dog am I missing?
>
> All thoughts appreciated - even those declaring me a doofus.
>
> Taiss.