NW6-SP4

I wanted to check some details by logging, but logging did
not work. The NFS-Gateway is started by the following
gystart.ncf:

#To start NFS Gateway services:
#nfsgy [-shadowCacheSize <value>] [-pageCacheSize <value>]
[-shadowVolume <value>]
# [-logFileSize <value>] [-logLevel <value>]
[-logVerbose] [-logFlushImmediate]
#(where -shadowCacheSize,-pageCacheSize and -logFileSize
values are in MBs)
#If any of the parameters are not given, nfsgy will take
default values for them
# Default shadowCacheSize = 8MB
# Default pageCacheSize = 8MB
# Default shadowVolume = sys
# Default logFileSize = 4MB
# Default logLevel = 1 (Error)
# Default logVerbose = NO
# Default logFlushImmediate = NO
#
#
#To mount a volume:
#GYMOUNT <VolumeName> [<IPAddress> <SharedPath>]
[-nfsVersion <value>]
# [-shadowVolume <value>]
# [-mountUid <value>] [-mountGid <value>] [-anonUid
<value>] [anonGid <value>]
# [-rpcTimeOut <value>] [-rpcRetries <value>]
# [-dirCompFreq <value>] [-umask <value>]
# [-readOnly | -readWrite] [-tossMetadata |
-noTossMetadata] [-lowerCaseUnixNames]
# [-readSize <value>] [-writeSize <value>]
[-maxOutstandingPackets <value>]
# [-logLevel <value>] [-logVerbose|logNonVerbose]
#Where:
# VolumeName :Name of the volume mounted by NFS
Gateway
# IPAddress :IP address of the remote machine
# SharedPath :Remote path to be imported
# nfsVersion :Version of NFS protocol to be
used
# Default = 3
# Valid Values: 2,3
# shadowVolume :Volume used for storing shadow
files for a
# mounted NFS Gateway volume
# Default = sys
# mountUid :Uid used for mounting the remote
path
# Default = 0
# Valid Range: 0 - 2147483647
# mountGid :Gid used for mounting the remote
path
# Default = 1
# Valid Range: 0 - 2147483647
# anonUid :Uid used for users without unix
profile
# Default = 55555
# Valid Range: 0 - 2147483647
# anonGid :Gid used for users without unix
profile
# Default = 55555
# Valid Range: 0 - 2147483647
# rpcTimeOut :Time in seconds to elapse before
RPC request
# retry
# Default = 1 second
# Valid Range: 1 - 2147483647
# rpcRetries :Number of times an RPC request to
be retried
# Default = 3
# Valid Range: 1 - 2147483647
# dirCompFreq :Time in seconds to elapse before
time stamps of
# directory entries are
synchronized with remote
# server
# Default = 0 seconds
# Valid Range: 0 - 2147483647
# umask :Umask value for the directory
entries created
# on this volume
# Default = 022
# Valid Range: 000 - 777
# readOnly :To mount the shared path as
read-only volume
# readWrite :To mount the shared path as
read-write volume
# Default = readWrite
# tossMetadata :Do not cache metadata of files on
this volume
# noTossMetadata :Cache metadata of files on this
volume
# Default = noTossMetadata
# lowerCaseUnixNames:Files created from NetWare side
will have filenames
# on Unix side which will have only
lowercase
# characters
# Default = Not enforced
# readSize :Read transfer buffer size. This
is applicable only for NFS version 3
# Value specified in KB
# Default = 32K
# Valid Values: 4,8,16,32
# writeSize :Write transfer buffer size. This
is applicable only for NFS version 3
# Value specified in KB
# Default = 32K
# Valid Values: 4,8,16,32
# maxOutstandingPackets:Specifies the maximum number
of outstanding packets to a UNIX machine.
# For a UNIX machine, NFS Gateway
uses the value specified in first instance
# of gymount.
# Default = 2147483647
# Valid Range: 1 - 2147483647
# logLevel :Level of logging to be enabled
for the volume
# Default = 1 (Error)
# Valid Values: 0,1,2,4
# logVerbose :Verbose information to be logged
# logNonVerbose :Verbose information will not be
logged
# Default = logNonVerbose
#
#For eg:
#gymount gateway_volume 232.232.232.122 /remote/home

#Any number of volumes can be mounted by repeatedly calling
gymount
#for eg:
#gymount vol1 232.232.232.122 /remote/home
#gymount vol2 132.132.132.182 /remote/usr
#
# In case you want to specify nfsgy parameters, specify them
before
# any gymount parameters.
# nfsgy parameters need to be specified only once.


nfsgy
gymount OPEN 192.168.6.2 /IVM/USERS/shared/Offen -mountUid 0
-mountGid 1 -anonUid 0 -anonGid 1 -dirCompFreq 5 -loglevel 4
-logverbose




The Server-Logger-Screen shows the following output:

Module LICMAN.NLM load status OK

--------------------------------------------------

NFSGY is loaded with following parameters:

shadowCacheSize = 8MB

pageCacheSize = 8MB

shadowVolume = SYS

logFileSize = 4MB

logLevel = 1

logVerbose = NO

logFlushImmediate = NO

--------------------------------------------------

Module NFSGY.NLM load status OK

Loading module GYMOUNT.NLM

Volume Mount Utility - NFS Gateway for NetWare 6.x

Version 1.00.16 22 September 2003

Copyright (c) 2002-2003 Novell, Inc. All Rights Reserved.

Module GYMOUNT.NLM load status OK

GYMOUNT is attempting to mount volume OPEN with Mount
Version 3. Please Wait...
Volume OPEN set to the DEACTIVE state.

Module DSI.NLM unloaded

Activating volume "OPEN"...

Volume OPEN set to the ACTIVE state.

Mounting Volume OPEN

** OPEN mounted successfully



That tells me, the at least the part "-loglevel 4
-logverbose" did not work as desired. Does anybody have an
idea, what I did wrong or whether this is a defect?

Sincerely

Karl