This may be a cluster forum problem, but I'll ask here just in case.
Loading DHCPSRVR manually on a node of our NW6 cluster server works
great.
However, loading it through the cluster scripts doesn't work as well.Our Netware clients will get IP addresses - but it seems to take
longer to
receive an address.
Also our PXE clients won't receive an address this way - but they will
by
loading DHCPSRVR at the console prompt.
Our cluster load / unload script isn't very complicated - right out of
the
manual.

CLUSTER DHCP CN=NWOAK1.O=OAKVILLE.T=TOWN_OF_OAKVILLE
add secondary ipaddress 172.20.10.40
dhcpsrvr --servaddr=172.20.10.40 -D2

Any ideas why there is a difference? It's running on the same server!

Graham