Folks,

I have set up dhcp server, subnets, subnet address ranges, etc. for
about
a dozen scopes, and everything seems to work well except for one
thing. I
was told by the vendor for ip phones (Cisco) at this site that they
need
option 150 (tftp server)configured for dhcp for the subnets which the
ip
phones will be on. I configued this through the dns/dhcp console with
the
appropriate ip address and everything works well except the option for

150. I included the option for 150 for the appropriate subnets, with
the
appropriate ip address. I temporarily set up a dhcp server on nt4
(and
took the Novell dhcp server off line) just to verify that the phones
will
receive the dhcp option ok (which they did). Any thoughts?

Thanks,

Nic