Ok, we have a new two node Netware 6sp3 cluster and we want to move
DHCP from our old Netware 5.1sp5 cluster to the new. The new clusterresource has been created mirroring the old resource except with the
new
server name. We tried creating a new DHCP_server in the DNSDHCP
console
and then assigning the subnet to the new DHCP_server. We then offline

the current DHCP and online DHCP on the new cluster. It seems to come

up ok on the new cluster, but then we get this:

DHCP Server 3.0 Debug Log start time :8-11-2003 1:34:59 pm
0 : Logged in as Server
Locator name is [DNS-DHCP.IS]
2 : LoadServerObj():Read DHCP Server Reference from NCP Server
Subnet address: 168.177.230.0, pSubnet->pOptions: D70393C0, len
=
52
Right before LoadAllRanges
subnet ref in LoadALLRanges: DCED 230 OR E600.CE.UT
pRange type read is 99, pDataServerRef: DHCP_CECL1.CE.UT,
pDHCPServerDN: DHCP_CECL1.CE.UT
Right before LoadAllIPs
subnet ref in LoadALLIPs: DCED 230 OR E600.CE.UT
SubnetHashTable created, size: 17
IPHash and MACHash created, size: 1181, ipCount = 255
Finished all IP hash table stuffing
Begin Fill pool for all subnets
LoadProcessing successful
IP Database loaded.
TCP/IP interface thread started.
AMAServerIPArray, first three values: 168.177.230.220 , 0.0.0.0
,
0.0.0.0
DHCP Server is ready at 8-11-2003 1:35:01 pm.
12 : Get type:2, IPAddr: 168.177.230.34, LeaseTime:0, MacIndx:60,
pIP=0

AMAGet() exit type=2, err=0, addr=168.177.230.34
2003/08/11 13:35:12 <DHCPINFORM> packet received from client
<0:1:3:2C:71:29>, IP Address <168.177.230.34>.
2003/08/11 13:35:12 Sending BOOTP/DHCP reply <DHCPACK> to
<0:1:3:2C:71:29> as <168.177.230.34>.
78 : Get type:4, IPAddr: 168.177.230.10, LeaseTime:0, MacIndx:1152,
pIP=0
Fill pool returned error 1
Error 5 adding new ip
AMAGet() exit type=4, err=5, addr=168.177.230.10
2003/08/11 13:36:17 <DHCPDISCOVER> packet received from client<0:1:2:77:CA:62>.
2003/08/11 13:36:17 DHCP Warning: Out of Addresses for client
<0:1:2:77:CA:62>.
81 : Get type:4, IPAddr: 168.177.230.10, LeaseTime:0, MacIndx:1152,
pIP=0
Fill pool returned error 1
Error 5 adding new ip
AMAGet() exit type=4, err=5, addr=168.177.230.10
2003/08/11 13:36:20 <DHCPDISCOVER> packet received from client<0:1:2:77:CA:62>.
2003/08/11 13:36:20 DHCP Warning: Out of Addresses for client
<0:1:2:77:CA:62>.
90 : Get type:4, IPAddr: 168.177.230.10, LeaseTime:0, MacIndx:1152,
pIP=0
Fill pool returned error 1
Error 5 adding new ip
AMAGet() exit type=4, err=5, addr=168.177.230.10
2003/08/11 13:36:29 <DHCPDISCOVER> packet received from client<0:1:2:77:CA:62>.
2003/08/11 13:36:29 DHCP Warning: Out of Addresses for client
<0:1:2:77:CA:62>.

We bring it back up on the old cluster and it's fine. We have also
tried to expand the subnet and highlight the address range and assignthe new DHCP_server there, but we get error EDHCP20 "Subnet zone
either
is not defined or has been deleted. First select a valid zone in theSubnet detail page." Where the heck is the Subnet detail page and
what
are we doing wrong? This seems like it should be a simple operation.Thanks!