When I load dhcpsrvr with the -d3 switch I have noticed the following error:

Fill pool returned error 1
Error 5 adding new ip
AMAGet() ext type=1, err=5, addr=0.0.0.0

A Novell TID (TID10058728) talks about a subnet not being setup, but mine is
setup and is handing out DHCP addresses, so I don't know what the problem
is. Any
thoughts?

I am running on NW6SP3 with DHCPSRVR v3.12.06, I ran dsrepair and had 0
errors.

Thanks,
Scott