We have set up a DHCP server on novell 5.1 sp6,At the moment our policy is
that all work stations must have a static address ,Which has been no
problem as the ip's have been sign by mac address permently. but out of a
1000's of ip address we have a few left .what i was hopeing for as we get
new workstations we could connect them to our network for zenimageing but
when we connect them to the network for the dhcp server says WARNING no ip
address left ,when i have a look there is over 300 ips left that can be
assign (which have not been assighn to any pc's)What have i done wrong or
not setup for the DHCP not to issue IP auto .(It issue The manual ips ok )