Hello,

I know this is most likely a MS problem but I thought I give it try here...

I have an NT4.0 server in my network it is the only MS server and is the
domain controller and the WINS server (192.168.7.13).

If I set up a PC to use DHCP I can't use the UNC to get to the server. For
example \\ntsvr1\wind2000 fails.

If I manually configure the ip settings it works fine.

My DHCP settings are as follows:
Code Option Name Values
3 Router 192.168.8.3
6 Domain Name Server 192.168.8.12, 192.168.7.10
44 Netbios over TCP/IP Name Server 192.168.7.13
46 Netbios over TCP/IP Node Type H-Node
78 Directory Agent 192.168.8.12,192.168.7.10
79 Service Scope Engineering

Any ideas would be greatly appreciated, this one's starting to make me a
little crazy.

Paul