We are running NW 6.5, SP2. One of our dynamic address ranges is
50-100 on a particular network.

One of our workstations needed a static address. We shut it down, then
set up a manual address (127) for it outside of that range. We have done
this many times before. We deleted the dynamic address which it had
used previously (inside the 50-100 range), then unloaded and reloaded

When the workstation came back up, it took address 50 instead of the

Currently, the 50 address is not displayed in the DHCP management
console. So we cannot delete the 50 and try again. The set up for the
127 address seems to be OK.


Thanks, Dave Olson