I have multiple issues I have been struggling with trying to get our
Netware 6.5 sp6 server to get backups to work via Backup Exec 9.2. Our
problems began when we replaced our LTO Superloader tape drive/robot
with a Overland 24 series 0319 tape drive/robot. After much
troubleshooting we then replaced our LSI22320 Scsi card with an Adaptec
39320A-R Scsi Card. After doing this replacement when I did a LIST
STORAGE ADAPTERS I was seeing this

0x05 [V323-A3] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 201}
0x06 [V323-A4] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 202}
0x22 [V323-A4-D1:0] HP ULTRIUM 3-SCSI D21H

It was not showing the robot at all. I looked at the version of the
ADPU320.HAM driver and it was dated 2003. So I updated this driver to
the latest one I could find on adaptecs website and now have version
3.013.13 Nov 14, 2006. Also My NWTAPE.CDM file is Ver 2.01.07 Sept 2006.

After doing this update I unloaded via the command prompt and reloaded
the ADPU320.HAM driver and did a LIST STORAGE ADAPTERS AGAIN I was
seeing this.

0x05 [V323-A3] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 201}
0x06 [V323-A4] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 202}
0x?? [V323-A2-??:?] Overland 0319
0x22 [V323-A4-D1:0] HP ULTRIUM 3-SCSI D21H

I thought great that is what I want to see. I next went and Launched
Backup Exec and I received a Error 1050 Unknown device driver Init
Error. Thinking maybe I should just get a clean reboot I restarted the
server. After a reboot and doing a LIST STORAGE ADAPTERS I was seeing this.

0x05 [V323-A3] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 201}
0x06 [V323-A4] Adaptec SCSI Card 39320A-Ultra320 SCSI {Slot 202}
0x?? [V323-A2-??:?] Unbound Device Object
0x22 [V323-A4-D1:0] HP ULTRIUM 3-SCSI D21H

I should also mention I was doing
SCAN ALL LUNS
SCAN FOR NEW DEVICES
still could no longer see the robot.

I even reattached my LTO Superloader just so I could get back in
business but I still am seeing the Unbound Device Object. I also tried
to unload and reload the driver from the command line which originally
worked and had no luck. Below is my statup.ncf file

LOAD ACPIDRV.PSM
LOAD CPQSHD.CDM
LOAD IDECD.CDM
LOAD SCSIHD.CDM
LOAD NWTAPE.CDM
LOAD IDEATA.HAM SLOT=10008
LOAD CPQRAID.HAM SLOT=10015
LOAD QL2300.HAM SLOT=1 /LUNS /ALLPATHS /PORTNAMES /PORTDOWN=2
LOAD HPQSP.CDM
LOAD ADPU320.HAM SLOT=201 /LUN
LOAD ADPU320.HAM SLOT=202 /LUN

Any ideas would be greatly appreciated.
Andy