Test environment:
Netware 6 SP5
ZDM65SP1b on server
Beginning with ZFD32SP3 workstations, migrating to ZDM65SP1b

Administrator console remains on ZFD32. Server is upgraded to 6.5. Client
workstation was on ZFD32 and then upgraded to ZDM65Sp1b. Remote control was
working with ZFD32. After upgrading the client workstation to 6.5, I
deleted the workstation object and allowed it to reimport using the 6.5
server and this worked successfully. However, I have not been able to
remote control it from the administration console that is still on ZFD32.

I'm trying to use Consoleone to remote control the target workstation. The
administrator has full rights to the root. ConsoleOne is still the one
without ZDM65 snapins. The new ConsoleOne with the ZDM65 snapins has never
been used in this tree yet. All policies are original ZFD32.

The target workstation remote management log file can be found below. I see
some errors in the log, but I would appreciate any insight into this...thank
you very much!!!

#(1360)# 11:43:10 AM 07/15/05 Normal : Got message from Zentray.exe
#(1360)# 11:45:21 AM 07/15/05 Normal : Got message from Zentray.exe
#(1336)# 11:46:31 AM 07/15/05 Normal : Resource DLL is successfully loaded
#(1336)# 11:46:31 AM 07/15/05 Normal : Reading settings from the file
#(1336)# 11:46:31 AM 07/15/05 Normal : C:\Program
Files\Novell\ZENworks\RemoteManagement\RMAgent\RMC FG.INI
#(1336)# 11:46:31 AM 07/15/05 Normal : Port value read from file = 1761 and
it will be used as the RM Communication port
#(1336)# 11:46:31 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(1336)# 11:46:31 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1336)# 11:46:31 AM 07/15/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1336)# 11:46:31 AM 07/15/05 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(1336)# 11:46:31 AM 07/15/05 Normal : ZenRem32.exe : ZenRem32ServiceMain()
successfully loaded Zenlite DLL
#(1336)# 11:46:32 AM 07/15/05 Critical : Failed to write the header
information in RCAICIP.HST GetLastError(): 6
#(1336)# 11:46:32 AM 07/15/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1336)# 11:46:32 AM 07/15/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'VMXP200:0C:29:35:CE:C4.Workstations.TEST'
#(1336)# 11:46:32 AM 07/15/05 Normal : Workstation is registered
#(1336)# 11:46:32 AM 07/15/05 Normal : Reading workstation DN and tree
name...
#(1336)# 11:46:32 AM 07/15/05 Normal : workstation DN -
VMXP200:0C:29:35:CE:C4.Workstations.TEST, treename - TEST_TREE
#(1336)# 11:46:32 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1336)# 11:46:32 AM 07/15/05 Critical : WMIsWorkstationAuthenticated
failed. errorCode: 1062
#(1336)# 11:46:35 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:46:41 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:46:46 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:46:51 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:46:56 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:47:01 AM 07/15/05 Critical : ZENNDSUtil: initializeContext()
failed...
#(1336)# 11:47:01 AM 07/15/05 Normal : Reading workstation DN and tree
name...
#(1336)# 11:47:01 AM 07/15/05 Normal : workstation DN -
VMXP200:0C:29:35:CE:C4.Workstations.TEST, treename - TEST_TREE
#(1336)# 11:47:01 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1336)# 11:47:01 AM 07/15/05 Critical : Workstation NOT yet
authenticated...
#(1336)# 11:47:01 AM 07/15/05 Critical : ZENNDSUtil: initializeContext()
failed...
#(1336)# 11:47:01 AM 07/15/05 Normal : Neither policy settings active. All
operations disabled.
#(1336)# 11:47:01 AM 07/15/05 Normal : ZENNDSUtil: Finished reading policies
#(1336)# 11:47:01 AM 07/15/05 Normal : ZENNDSUtil: Unloaded modules...
#(1336)# 11:47:01 AM 07/15/05 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(1336)# 11:47:05 AM 07/15/05 Normal : Got message from Zentray.exe
#(1336)# 11:47:27 AM 07/15/05 Normal : GetOptimizatonStatusFromDarpan:
Darpan is loaded successfully
#(1336)# 11:47:27 AM 07/15/05 Normal : GetOptimizatonStatusFromDarpan:
Successfully communicated with Darpan
#(1336)# 11:47:27 AM 07/15/05 Normal : GetOptimizatonStatusFromDarpan:
Darpan is Unloaded successfully
#(1300)# 11:49:54 AM 07/15/05 Normal : Resource DLL is successfully loaded
#(1300)# 11:49:54 AM 07/15/05 Normal : Reading settings from the file
#(1300)# 11:49:54 AM 07/15/05 Normal : C:\Program
Files\Novell\ZENworks\RemoteManagement\RMAgent\RMC FG.INI
#(1300)# 11:49:54 AM 07/15/05 Normal : Port value read from file = 1761 and
it will be used as the RM Communication port
#(1300)# 11:49:54 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(1300)# 11:49:54 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1300)# 11:49:54 AM 07/15/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1300)# 11:49:54 AM 07/15/05 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(1300)# 11:49:54 AM 07/15/05 Normal : ZenRem32.exe : ZenRem32ServiceMain()
successfully loaded Zenlite DLL
#(1300)# 11:49:55 AM 07/15/05 Critical : Failed to write the header
information in RCAICIP.HST GetLastError(): 6
#(1300)# 11:49:55 AM 07/15/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1300)# 11:49:55 AM 07/15/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=VMXP200:0C:29:35:CE:C4.OU=Workstations.O=TEST'
#(1300)# 11:49:55 AM 07/15/05 Normal : Workstation is registered
#(1300)# 11:49:55 AM 07/15/05 Normal : Reading workstation DN and tree
name...
#(1300)# 11:49:55 AM 07/15/05 Normal : workstation DN -
CN=VMXP200:0C:29:35:CE:C4.OU=Workstations.O=TEST, treename - TEST_TREE
#(1300)# 11:49:55 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1300)# 11:49:55 AM 07/15/05 Critical : WMIsWorkstationAuthenticated
failed. errorCode: 1062
#(1300)# 11:50:00 AM 07/15/05 Normal : Workstation IS authenticated...
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in
CN=VMXP200:0C:29:35:CE:C4.OU=Workstations.O=TEST
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Workstation Policy -
'Workstation Package:General:Remote Control Policy.TEST'
#(1300)# 11:50:00 AM 07/15/05 Normal : Reading workstation DN and tree
name...
#(1300)# 11:50:00 AM 07/15/05 Normal : workstation DN -
CN=VMXP200:0C:29:35:CE:C4.OU=Workstations.O=TEST, treename - TEST_TREE
#(1300)# 11:50:00 AM 07/15/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1300)# 11:50:00 AM 07/15/05 Normal : Workstation IS authenticated...
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1300)# 11:50:00 AM 07/15/05 Normal : Failed to open
HKLM\Software\Novell\ZENWorks\CurrentUserDN
#(1300)# 11:50:00 AM 07/15/05 Normal : Only workstation policy settings
active...
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Finished reading policies
#(1300)# 11:50:00 AM 07/15/05 Normal : ZENNDSUtil: Unloaded modules...
#(1300)# 11:50:00 AM 07/15/05 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(1300)# 11:50:30 AM 07/15/05 Normal : Got message from Zentray.exe