My fellow imagers,

I have been reading that the hot patch should work with the 745 but I am
using the bootcd for HP3 on a 745 but we get no link on the NIC. The
link is on when we first turn on the computer but it disappears when
Linux loads off the CD. The cd boots and I can get to the menu to make
an image but it says it cannot connect to the server. We checked the NIC
port and it did not have a link still so I'm thinking it's a NIC driver
problem. Should PXE be enabled in the BIOS on the NIC for it to work off
the bootcd?