In the past version of ZEN using the IMG PC1 NTFS then IMGPA1 then IMG RP
Source a1:p1 would take a 10 gb image and apply it to the entire 40 gb
hard disk. When I try that using zen 7 it appears to accept the commands
after the image loads and I reboot I get missing loader.

Looking for the commands to expand a smaller image to a larger hard
drive. We are using zfd 7 downloaded yersterday the startup screen says
SUSE the version flashes by before I can see it. Select Manual and use
the commands listed above.

The PC is a Dell with a SATA 3.0 80 GB hard drive. The source was a 40
GB hard drive.

After the image is installed I tried an FDISK /mbr which has worked in
the past.