I recently upgraded our ZFD server from 4.0.1 to 6.5. Imaging was working
fine, regardless of if we were using a linux partition or PXE boot. Now
after the upgrade, the imaging program refuses to recognize there is any
work available. I've tried this on other machines that have been successful
before the 6.5 update, as well as new machines newly registered into NDS.

I ran the imaging server program with the debug option as suggested by
another post, and come up with the following:
Tue Jul 20 16:20:42 2004 -- [zEL] Logging enabled.
IMGSERV Version 6.5.0.4
Tue Jul 20 16:20:42 2004 -- [ii] ftp root path:
//server/sys:Zenworks/Imaging/update
Tue Jul 20 16:20:42 2004 -- [RUFL] file 0 : /ZUpdate.s
Tue Jul 20 16:20:42 2004 -- [RUFL] file 1 : /ZUpdate.sig
Tue Jul 20 16:20:42 2004 -- [RUFL] file 2 : /updateBin.tgz
Tue Jul 20 16:20:42 2004 -- [RUFL] file 3 : /updateLib1.tgz
Tue Jul 20 16:20:42 2004 -- [RUFL] file 4 : /updateLib2.tgz
Tue Jul 20 16:20:42 2004 -- [RUFL] file 5 : /bin/lilo.s
Tue Jul 20 16:20:42 2004 -- [RUFL] file 6 : /bin/update.s
Tue Jul 20 16:20:42 2004 -- [RUFL] file 7 : /dd.tgz
Tue Jul 20 16:20:42 2004 -- [ii] client version: 6500
Tue Jul 20 16:20:42 2004 -- [LNF] NSS functions loaded.
Tue Jul 20 16:21:41 2004 -- [LC] open connection, 10.1.1.10
Tue Jul 20 16:21:41 2004 -- [HC] received PROXY_CMD_VERSION
Tue Jul 20 16:21:41 2004 -- [HC] versions: 7, 7, -1
Tue Jul 20 16:21:41 2004 -- [HC] received PROXY_CMD_PXE_MENU
Tue Jul 20 16:21:41 2004 -- [RPM]
Tue Jul 20 16:21:41 2004 -- [RPM] GWIL = 3640
Tue Jul 20 16:21:41 2004 -- [RPM] Workstation Information:
Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 5
WorkstationInformation.length ............... 3640
WorkstationInformation.Chipset .............. Intel Intel(R) Pentium(R) 4
processor 2600 Mhz
WorkstationInformation.Video ................ Intel Corporation
Integrated Graphics Device
WorkstationInformation.Network .............. Intel Corporation Gigabit
Ethernet Controller (LOM)
WorkstationInformation.Soundcard ............ Intel Corporation AC'97
Audio Controller
WorkstationInformation.Diskcontroller ....... Intel Corporation SATA
Controller
WorkstationInformation.HarddriveSizeMB ...... 78167
WorkstationInformation.RAM .................. 495
WorkstationInformation.MACAddress............
000c:f17a:1947:0000:0a01:0459
WorkstationInformation.ipAddress ............ 10.1.4.89
WorkstationInformation.BootMedia ............ 0
WorkstationInformation.zenPartitionType...... 0x00
Tue Jul 20 16:21:41 2004 -- [GPM]
Tue Jul 20 16:21:41 2004 -- [RAD] Error -603, "zenimgImagingService",
"TOPPERS_FS1.SHSVC"
Tue Jul 20 16:21:41 2004 -- [LAIS]: RAD error, -603
Tue Jul 20 16:21:41 2004 -- [GPM] LASA failure, -603
Tue Jul 20 16:21:41 2004 -- [GPM] validate
Tue Jul 20 16:21:41 2004 -- [GPM] workstation
Tue Jul 20 16:21:41 2004 -- [GPM] flags, 0x1
Tue Jul 20 16:21:41 2004 -- [GPM] policy
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"OU=SHSVC_Workstations.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"CN=ZENWEBLAB(00:0C:F1:7A:19:47).OU=SHSVC_Workstat ions.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "Group Membership",
"CN=ZENWEBLAB(00:0C:F1:7A:19:47).OU=SHSVC_Workstat ions.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"OU=SHSVC_Workstations.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [GPM] GPD failure, 0
Tue Jul 20 16:21:41 2004 -- [GPM] done, -1
Tue Jul 20 16:21:41 2004 -- [GPF]
Tue Jul 20 16:21:41 2004 -- [RAD] Error -603, "zenimgImagingService",
"TOPPERS_FS1.SHSVC"
Tue Jul 20 16:21:41 2004 -- [LAIS]: RAD error, -603
Tue Jul 20 16:21:41 2004 -- [GPF] LASA failure, -603
Tue Jul 20 16:21:41 2004 -- [GPF] validate
Tue Jul 20 16:21:41 2004 -- [GPF] workstation
Tue Jul 20 16:21:41 2004 -- [GPM] policy
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"OU=SHSVC_Workstations.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"CN=ZENWEBLAB(00:0C:F1:7A:19:47).OU=SHSVC_Workstat ions.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "Group Membership",
"CN=ZENWEBLAB(00:0C:F1:7A:19:47).OU=SHSVC_Workstat ions.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [RMAD] Error -603, "zenpolPolicy",
"OU=SHSVC_Workstations.O=SHSVC"
Tue Jul 20 16:21:41 2004 -- [GPF] done, -1
Tue Jul 20 16:21:41 2004 -- [RPM] PFPS = 2
Tue Jul 20 16:21:41 2004 -- [HC] done, PROXY_CMD_PXE_MENU
Tue Jul 20 16:21:41 2004 -- [HC] received PROXY_CMD_CLOSE
Tue Jul 20 16:21:41 2004 -- [ECC] close connection, 10.1.1.10
Tue Jul 20 16:21:41 2004 -- [ECC] CS
PXE boot

I haven't been using any rules to do the imaging, I've simply selected all
the machines I want to image on startup, hit the checkbox to bring down the
image upon next boot, and things've worked smoothly.

I've tried reinstalling the ZFD program and get an error message stating
that there was an error copying files to the server (yet the file copy log I
get through installer debug states that all files copied successfully...)
Everything boots up fine though, and all modules seem to be the 6.5 version.

NW version 6.5SP2
ZFD version, obviously, 6.5. ZFD agent installed from CD.
Client version 4.90sp1a

Thanks

Chris