Hi,

I have installed ZfD 6.5 on a NetWare 6.5 sp2 cluster, eveything works
except if you configure a workstation object in edir to install a new image
on next reboot.
I have debugged the imaging component:

Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 5
WorkstationInformation.length ............... 3640
WorkstationInformation.Chipset .............. Intel Intel(R) Celeron(tm)
processor 1000 MHz 1000 Mhz
WorkstationInformation.Video ................ Intel Corporation 82815 815
(Solano) Interal GUI Accelerator
WorkstationInformation.Network .............. Intel Corporation 82701BA
810E (ICH2) LAN Controller
WorkstationInformation.Soundcard ............ Intel Corporation
82801BA/BAM 810E (ICH2) AC'97 Audio Controller
WorkstationInformation.Diskcontroller ....... Intel Corporation 82801BA
810E (ICH2) UltraDMA/100 IDE Controller
WorkstationInformation.HarddriveSizeMB ...... 19092
WorkstationInformation.RAM .................. 255
WorkstationInformation.MACAddress............
0002:a5e3:6858:0000:0a74:5b8f
WorkstationInformation.ipAddress ............ 10.116.91.143
WorkstationInformation.BootMedia ............ 0
WorkstationInformation.zenPartitionType...... 0x00
Wed Feb 09 10:35:49 2005 -- [GPM]
Wed Feb 09 10:35:49 2005 -- [RAD] Error -603, "zenimgImagingService",
"CLUS02.SERVICES.HQ.MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [LAIS]: RAD error, -603
Wed Feb 09 10:35:49 2005 -- [GPM] LASA failure, -603
Wed Feb 09 10:35:49 2005 -- [GPM] validate
Wed Feb 09 10:35:49 2005 -- [GPM] workstation
Wed Feb 09 10:35:49 2005 -- [RAD] Error -603, "zenimgPXEFlags",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [GPM] flags, 0x0
Wed Feb 09 10:35:49 2005 -- [GPM] policy
Wed Feb 09 10:35:49 2005 -- [RMAD] Error -603, "zenpolPolicy",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [RMAD] Error -603, "Group Membership",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [GPM] GPD failure, 0
Wed Feb 09 10:35:49 2005 -- [GPM] done, -1
Wed Feb 09 10:35:49 2005 -- [GPF]
Wed Feb 09 10:35:49 2005 -- [RAD] Error -603, "zenimgImagingService",
"CLUS02.SERVICES.HQ.MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [LAIS]: RAD error, -603
Wed Feb 09 10:35:49 2005 -- [GPF] LASA failure, -603
Wed Feb 09 10:35:49 2005 -- [GPF] validate
Wed Feb 09 10:35:49 2005 -- [GPF] workstation
Wed Feb 09 10:35:49 2005 -- [RAD] Error -603, "zenimgPXEFlags",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [GPM] policy
Wed Feb 09 10:35:49 2005 -- [RMAD] Error -603, "zenpolPolicy",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [RMAD] Error -603, "Group Membership",
"CN=10288.OU=USERS.OU=HQ.O=MYCOMPANY"
Wed Feb 09 10:35:49 2005 -- [GPF] done, -1
Wed Feb 09 10:35:49 2005 -- [RPM] PFPS = 2
Wed Feb 09 10:35:49 2005 -- [HC] done, PROXY_CMD_PXE_MENU
Wed Feb 09 10:35:49 2005 -- [HC] received PROXY_CMD_CLOSE
Wed Feb 09 10:35:49 2005 -- [ECC] close connection, 10.116.91.21
Wed Feb 09 10:35:49 2005 -- [ECC] CS
Wed Feb 09 10:35:49 2005 -- [LC] open connection, 10.116.91.21
Wed Feb 09 10:35:49 2005 -- [HC] received PROXY_CMD_VERSION
Wed Feb 09 10:35:49 2005 -- [HC] versions: 7, 7, -1
Wed Feb 09 10:35:49 2005 -- [HC] received PROXY_CMD_PXE_FILE
Wed Feb 09 10:35:49 2005 -- [RPF]
Wed Feb 09 10:35:49 2005 -- [RPF] GWIL = 3640
Wed Feb 09 10:35:49 2005 -- [RPF] Workstation Information:



I think this is described in TiD10096126, but the thing is I *DO* have
a -ZIS object in eDir.
If I start the maintenance mode on the workstation and IMG and then F9 to
request work it *does* work, only through PXE it doesn't.
Does someone have a clue to what could be going on??

Thanks,
Hein