I'd like to know if this is possible. I want to be able to connect to our
imaging server w/PXE, but not pull the image file from the server. I would
like to use the imaging engine menu and browse out to an ext. USB hdd. I am
having a problem getting the drive to mount however. What we're looking to
do is provide ext. drives to field techs with all of the image files, about
80 gig or so. They would use these at remote sites which connect back to
our main campus over frame relay. I don't want to try to format the drive
fat 16, etc. like a previous poster was asking on a 2Gb stick. That would
defeat our purpose due to the partition size limits. TIA.