Configuration:

Two Novell servers running DHCPSRVR with IP ranges split between them:

Example: Subnet 10.1.14.0/23 is split between

- Server1 (10.1.1.5) (ZEN Imaging server & ProxyDHCP running) which
handles the following address range 10.1.14.101 - 10.1.15.52

- Server2 (10.1.1.2) which handles the following address range 10.1.15.53 -
10.1.15.254


DHCP Helper config (Cisco Router):
>

ip helper-address 10.1.1.2
ip helper-address 10.1.1.5
>


Issue:

PXE boot to ZEN imaging server fails when a client's DHCP request is
directed to Server2 (10.1.1.2). If the user "gets lucky" and the DHCP
request is directed to Server1 (10.1.1.5) the PXE boot process is
successfully inititated.

If we remove the IP helper for Server2 from the router, PXE boot works
every time.

We would like to maintain our redundant DHCP server configuration as it
improves fault-tollerance for our DHCP services. Is there a way to keep
this config and resolve the PXE boot issue?


Thanks in advance, Josh