HELP!

Sorry, but I've been racking my brain all day and can't figure this one out.

We just upgraded last night from ZFD 4.0.1 to 6.5 w/SP2. The server is Netware 6.5 w/sp3.

Imaging was working fine before the upgrade last night. All of the PXE services are loaded on the server. DHCP and PDHCP are not on the same box. There is an IP helper already configured to point to our PDHCP server for imaging across vlans on the DHCP server.

When a workstation boots via PXE, it gets an IP address from the DHCP server as expected, and contains the correct "Proxy IP address" for the PDHCP server.

After this we get:

BOOT SERVER IP: 172.27.2.11
PXE-E35: TFTP read timeout
PXE-E39: TFTP cannot read from connection
PXE-M0F: Exiting HP PXE ROM

I have both the IMGSERV and DTS NLMs configured for debug logging, but the log file for both don't have much in them. Apparently because the workstation can't find the PXE server.

Any clues?

Thanks!

Larry