We are trying to setup a new image for the new Dell Latitude D630 laptops.
Problem is when we try to run the imaging program to get it started we get
kicked out immediately back to the prompt.

The last time we saw a similar issue to this was when we were imaging the
Dell Optiplex GX745's. We had to change the SATA drive type to Legacy and
Novell had to do some re-coding of our Zenworks software to make it work.
I am wondering if this is a known issue with Zen 6.5 and if an upgrade to
Zen 7.0 can fix it or if it can be taken care off without upgrading. Thanks