Hi all,

I'm trying to use PXE and imagining behind a router.
So far I have configured the folowing:

DHCPserver 192.168.1.2
PXE/Imaging server 192.168.1.12

At the remote location I've configured the Cisco router as following:
----/----
interface Vlan10
description WAN Interface
ip address 10.0.0.2 255.255.255.0
!
interface Vlan11
description LAN Interface
ip address 192.168.80.1 255.255.255.0
ip helper-address 192.168.1.2
ip helper-address 192.168.1.12

ip forward-protocol udp bootpc
ip forward-protocol udp bootps
----/----

At the DHCP server I set the following options:
3 - Gateway > 192.168.80.1
6 - DNS > 192.168.1.5
78 - DA > 192.168.1.31
79 - SCOPE > SCOPE

An imaged workstation works fine, but when I try to use PXE it gives
the following error:
----/----
Client MAC <mac adres of ws>
ClientIP: 192.168.80.100 MASK: 255.255.255.0
DHCPIP: 192.168.1.2 ProxyIP: 192.168.1.12
GatewayIP: 192.168.80.1


PXE-E78: Could not locate boot server

PXE-M0F Exiting
----/----

Do I have to set DHCP options:
66 = Boot Server Host Name
67 = BootFile Name

If yes, what setting should I use?


Thanx,

Martin Haaksema



--