Hi,
having a "little" problem:

Scenario:
Building 2-Node-Cluster with 2xNW65SP6 Server and BM 3.9

The Problem is using only ONE public ip address for OUTGOING HTTP PROXY
traffic. (exp. 100.100.100.50)
No chance with workarounds because users contacts some webserver over
proxy,
and these webservers expects for authentication one specific ipaddress as
source. So in case of failover, I must disable this IP on node1 and enable
it on node2.

Test1:
- Activate Public board and bind with ip 100.100.100.10
- define imanager proxyservice only 100.100.100.50 as public
- add secondary ip 100.100.100.50 in clusterscript
- bring up proxy - outgoing traffic comes from .10 :-(

Test2:
- in inetcfg define binding on public board with ip 100.100.100.50
and disable it with tab-key
- define imanager proxyservice only 100.100.100.50 as public
- insert in clusterscript: BIND IP BX2_2_EII_EII ARP=Yes Mask=...
Address=100.100.100.50
Result: System is unbind all secondary ip's inclusive the
ClusterIP and Ressource-IP, that kills the the Cluster :-(

BTW:
SET PRESERVE SECONDARY IPADDRESS AFTER REINITIALIZE SYSTEM is ON !

Any Idea or help appreciated

Egbert