I am trying to setup my NW6.5 server to handle VLANs. I have Intel
PRO1000 NICs, CE1000 and IANS drivers loaded. I can get it to work
without vlans or I can get it to work with VLAN 160 but VLAN 1 stops
working. Here are my configs...

With this setup I can ping the 192.168.0.7 address but computers on VLAN
160 cannot ping anything.


LOAD TCPIP
LOAD CE1000.LAN SLOT=10013 FRAME=ETHERNET_II NAME=CE1000_4_EII
LOAD CE1000.LAN SLOT=702 FRAME=Ethernet_II NAME=CE1000_3_EII
LOAD CE1000.LAN SLOT=701 FRAME=Ethernet_II NAME=CE1000_2_EII
LOAD iANS vlanid=1 frame=ethernet_ii name=vlan_1_ii team=1
load iANS vlanid=160 frame=ethernet_ii name=vlan_160_ii team=1
bind iANS CE1000_4_EII team=1
load iANS commit team=1
#BIND IP vlan_1_ii addr=192.168.0.7 mask=255.255.240.0 gate=192.168.3.33
BIND IP vlan_160_ii addr=172.26.0.7 mask=255.255.240.0 gate=172.26.0.1
BIND IP CE1000_4_EII addr=192.168.0.7 mask=255.255.240.0 gate=192.168.3.33



With this setup a computer on VLAN 160 can ping the 172.26.0.7 address
but not the 192.168.0.7 address. Also a pc on VLAN 1, my native VLAN
that everything is on right now, cannot ping 192.168.0.7.

LOAD TCPIP
LOAD CE1000.LAN SLOT=10013 FRAME=ETHERNET_II NAME=CE1000_4_EII
LOAD CE1000.LAN SLOT=702 FRAME=Ethernet_II NAME=CE1000_3_EII
LOAD CE1000.LAN SLOT=701 FRAME=Ethernet_II NAME=CE1000_2_EII
LOAD iANS vlanid=1 frame=ethernet_ii name=vlan_1_ii team=1
load iANS vlanid=160 frame=ethernet_ii name=vlan_160_ii team=1
bind iANS CE1000_4_EII team=1
load iANS commit team=1
BIND IP vlan_1_ii addr=192.168.0.7 mask=255.255.240.0 gate=192.168.3.33
BIND IP vlan_160_ii addr=172.26.0.7 mask=255.255.240.0 gate=172.26.0.1
#BIND IP CE1000_4_EII addr=192.168.0.7 mask=255.255.240.0 gate=192.168.3.33


I know my way around my Cisco switches well and have other systems in
other vlans without a problem so I do not think that is the issue. Any
advice?

I am loading all of this in my autoexec.ncf file. I tried using the
inetcfg with no luck.