I am working on speeding up the login process of our WINXP
workstations.. Client version 4.91 SP2 and SP3
NW 6.5 SP5

Below is my slpinfo /all from a workstation..

Can anyone tell me if all looks ok with this ??
Thanks in advance
Doug



************************************************** ***
*** Novell Client for Windows NT ***
*** Service Location Diagnostics ***
************************************************** ***

SLP Version: 4.91.0.1
SLP Start Time: 6:58:36am 12/12/2007
Last I/O: 2:45:32pm 12/19/2007
Total Packets: Out: 3217 In: 1610
Total Bytes: Out: 278533 In: 35076


SLP Operational Parameters Values
------------------------------- ------------
Static Scopes NO
Static Directory Agents NO
Active Discovery YES
Use Broadcast for SLP Multicast NO
Use DHCP for SLP YES
SLP Maximum Transmission Unit 1400 bytes
SLP Multicast Radius 32 hops


SLP Timers Values
------------------------------------- ------------
Give Up on Requests to SAs 15 seconds
Close Idle TCP Connections 5 minutes
Cache SLP Replies 1 minutes
SLP Default Registration Lifetime 10800 seconds
Wait Before Giving Up on DA 5 seconds
Wait Before Registering on Passive DA 1-2 seconds


Scope List Source(s)
---------------------------------------- ------------
<unscoped>
MTSD_SCOPE DHCP,DA


DA IP Address Source(s) State Version Local Interface Scope(s)
--------------- --------- ----- ------- ---------------
---------------
10.47.56.2 DHCP UP SLPV2 10.47.57.9 MTSD_SCOPE
10.47.64.2 DHCP UP SLPV2 10.47.57.9 MTSD_SCOPE


Local Interface 10.47.57.9
---------------------------------
Operational State: UP
Operating Mode(s): MCAST,STATIC-DA,DHCP-MANDATORY-SCOPES
SA/UA Scopes: MTSD_SCOPE
Last I/O: 2:45:32pm 12/19/2007
Total Packets: Out: 3217 In: 1610
Total Bytes: Out: 278533 In: 35076
Last Addr Out: 10.47.56.2
Last Addr In: 10.47.56.2