I have a ZAM install at a client site and everything is running fine except partially one item, Network Discovery (ND). ND runs fine on the subnet that the ZAM server (single install) is part of. The ND "runs" for the other subnets (class C size), and reports that it was successful, but reports back nothing. We can ping to the other subnets and they login to the network just fine, but no ND information is gathered. I would assume that since I can ping from a command prompt from the server that I would at least get a list of IP's from that subnet, but I get nothing. The TaskServerCore log has 3 lines for the scan, start, complete and completed

<EVENT AT="3/13/2008 3:31:24 PM" SEVERITY="Info">

CNetworkDiscoveryTask::OnStartTask()

</EVENT>



<EVENT AT="3/13/2008 3:34:11 PM" SEVERITY="Info">

Network Discovery Progress...Network Discovery Complete (0, 0, 0)

</EVENT>



<EVENT AT="3/13/2008 3:34:11 PM" SEVERITY="Info">

CNetworkDiscoveryTask::Completed()

</EVENT>

Any thoughts would be appreciated.

Thanks,
Dan V.