We have a 9 node Netware 6.5 sp 5 and we have one server that the HBA failed and all servera just have on HBA QL23xx. We replace the HBA with a spare on and updated the firmware on that server, and then check the world wide names and then configure them for the new server and removed the old server. This is on an EMC SAN. POWPATH is running in the STARTUP.NCF with the same settings as all the other servers.

The issue we are having now after all these setting and the navagent nlm running, and the server will not join the cluster.

our load statement for the Navagent is
load sys:\emc\agent\navagent -f \emc\agent\agent.cfg

and the above agent.cfg was updated by the SAN when we were checking configurations on the LUNs