Hi everyone,

We have switches configured with 5 VLANs, and would like these switches to
authenticate to a RADIUS server with a client's MAC address. Based on the
client's MAC address, need the RADIUS server to tell the switches which VLAN
to use for the client's port.

No problems with configuring the switch - it's the RADIUS side we're having
trouble with. We have BorderManager 3.8 running on NetWare 6.5 with the
RADIUS modules installed - is there a way to configure the RADIUS server
with a MAC Address to VLAN assignment table? Have tried to add a DAS object
through ConsoleOne, but are unsure how to configure it further.

Any assistance would be greatly appreciated.