We created a Netware 6.5sp7 2-node server cluster with a third NetWare
6.5sp7 server configured as that cluster's iscsi san.

We now want to replace the drives holding the iscsi partition, pool & volume
on the third server. We want to remove the 2 ide drives and replace them
with a raid 1 array of scsi or sata drives of higher capacity.

What is the best way to do this? As much detail as possible would be so
appreciated. I grabbed the following from a post just a few days old. Does
this say it all? Thanks.

1. Cluster down
2. ULDNCS on all nodes
3. Down all nodes and restart one with the MSA management CD for
configuring arrays
4. Delete SBD partition on both the failing array and the good mirror
5. Delete the bad array, build and verify new array
6. In C1, delete the following resources:
Vol1 (Volume Object)
and, from within the cluster resource, Vol1Pool_Server
7. Start one node of cluster with LDNCS remarked out so no cluster
8. Load CLSTRLIB.nlm, VLL.nlm, and SBDLIB.nlm then run SBD Install
and re-created a mirrored SBD partition.
9. Re-create pool and volume on the array, configure as shared for
clustering, mount, and import into DS. Copy load/unload scripts back
into the pool
10. Restart node allowing LDNCS to run, and bring up the other nodes
11. Restore data and trustee information.