Hi ...

I am having problems will all of our 200+ workstations accessing SLP on our NW6 sp5 servers.
Our 4 NW6 servers are active and can talk between themselves without issue.

GCL_FS1:DISPLAY SLPDA

SLP LOOPBACK : v2 : ACTIVE : SCOPE : IANA : 8 : 0ms
192.168.1.2 : v2 : ACTIVE : SCOPE : STATIC : 8 : 0ms
192.169.1.1 : v2 : ACTIVE : gglscope : STATIC : 8 : 85ms

Total Active: 3 Total Inactive: 0


but if I try a slpinfo /d from a workstation it keeps coming back with this :

C:\>slpinfo /d

************************************************** ***
*** Novell Client for Windows NT ***
*** Service Location Diagnostics ***
************************************************** ***

SLP Version: 4.91.3.0
SLP Start Time: 11:07:20am 5/26/2008
Last I/O: 12:34:03am 5/26/2008
Total Packets: Out: 342 In: 8
Total Bytes: Out: 18796 In: 160


DA IP Address Source(s) State Version Local Interface Scope(s)
--------------- --------- ----- ------- --------------- ---------------

192.168.1.2 CNFG NORSP ? 192.168.1.43 <unknown>


I can ping the server, and have setup the 'Service Location' information in the nwclient (nwclient 4.91 sp4) correctly ...

I have also put my network cable right next to the servers cable on the switch and checked that port 427 is open TCP/UDP ..

I am lost on what else to do ...

thx

Paul Jamieson
Toronto, Canada