i was installed ZCM 10.1
OS windows 2003

i was take a base image and i want to deploy it to new physical mashine based hardware rules at "Zenworks Control Center ---> Configuration ---> device management ---> preboot service --> Device Imaging Work Assignment " then i was add hw rules based inforamtion that collected from the new physical mashine when boot from bootcd imaging and click manual mode and click img --> f9 system information , but the problem the rule not match although it assigen based OR method , that's mean any rule matched it will be imaged but nothing , please advice me ,

i was test apply the hw rule on VMware it work properly

when view the preboot novell-pbserv.log file i see error message called

Dumping Workstation Information:

WorkstationInformation.signature ............ ZENWSINF

WorkstationInformation.version .............. 6

WorkstationInformation.length ............... 5176

WorkstationInformation.Chipset .............. Intel Other 1800 Mhz

WorkstationInformation.Video ................ Intel Corporation 82945G/GZ Integrated Graphics Controller

WorkstationInformation.Network .............. Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller

WorkstationInformation.Soundcard ............ Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller

WorkstationInformation.Diskcontroller ....... Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller

WorkstationInformation.MACAddress............ 00:1e:90:88:e7:fe

WorkstationInformation.ipAddress ............ 10.204.110.238

WorkstationInformation.BiosAssetTag .........

WorkstationInformation.BiosSerialnumber ..... CNX80809SP

WorkstationInformation.BiosVersion .......... American Megatrends Inc. 5.22 12/12/2007

WorkstationInformation.SystemManufacturer ... HP-Pavilion

WorkstationInformation.ProductName .......... GS209AA-ABV dx2290MT