Hello all,

I recently configured my first OES 2 box to be a DA - followed the Novell
OES 2 Installation Guide instructions.
rcslpd and rcndsd were restarted and SLP was working correctly.

After a server reboot, status of slpd was running but slptool findsrvs
service showed nothing. The log file list contained:

****************************************
Wed Sep 17 15:43:44 2008
SLPD daemon started
****************************************
Command line = /usr/sbin/slpd
Using configuration file = /etc/slp.conf
Using registration file = /etc/slp.reg
Using SPI file = /etc/slp.spi
Listening on loopback...
Broadcast socket for 255.255.255.255 ready
Agent Interfaces =
Agent URL = service:directory-agent://10.10.1.205
Startup complete entering main run loop ...

As you can see, the Agent Interfaces was blank.

If I restart rcslpd and rcndsd SLP works again and the log file shows:

****************************************

Wed Sep 17 14:32:39 2008

SLPD daemon started

****************************************

Command line = /usr/sbin/slpd

Using configuration file = /etc/slp.conf

Using registration file = /etc/slp.reg

Using SPI file = /etc/slp.spi

Listening on loopback...

Listening on 10.10.1.205 ...

Multicast socket on 10.10.1.205 ready

SLPv1 Service Location General Multicast socket on 10.10.1.205 ready

SLPv1 DA Discovery Multicast socket on 10.10.1.205 ready

Unicast socket on 10.10.1.205 ready

Broadcast socket for 255.255.255.255 ready

Agent Interfaces = 10.10.1.205

Agent URL = service:directory-agent://10.10.1.205

Startup complete entering main run loop ...

Any ideas on a server reboot SLP does not startup correctly?