Strange. Our server was down for a week after a IKE hit. It went down hard, but came up with no errors, and I have taken it down gracefully and brought back up again with no errors. Every workstation and laptop on the network can image with no problems except for the Gateway e475M laptop. These worked fine before the storm but now when you PXE boot them and hold Ctrl + Alt it completely ignores the key sequence. There is no policy applied for this at any level of the Tree. All other models work just fine, but this one will not. If I use a boot CD they load the linux kernel and image without any issues. I just can't load linux holding ctrl + alt. Any ideas out there?