We are running NW 6.5 SP5, BM 3.8 SP4 with the post SP4 update. I have a Deny rule created for port 443 which works great. However, I need to create an Allow rule for port 443 that will open specific sites. I have tried to create an Allow Rule for port 443, source any, destination https://www.testprep.com/php2/login....ool_code=xxxxx and made sure that it was above the Deny Rule for port 443. It does not work. I even specified the source and it still does not work. I have read most of the posts here about HTTPS and I used Craig's book to configure my filters. Any ideas would be appreciated.

Joe Merricks
Network Administrator
Hargrave Military Academy
merricksj@hargrave.edu