Hey ,

we have a DL 380 G5 Server with a MSA 2012Sa connectec through a HP branded LSi Controller LSI Corpo SAS1068E .
When we start the Server and load the lsimptnw.ham driver only unbound device object comes back. No other LSimptnw versions help.
Another thing is when we go in the Controller bios and look for the sas Drives no device is seen.
Through the web gui we see all the drives but not to manage for netware.
in Nssmu and the othe rtools the device is not to see.


Module LSIMPTNW.HAM load status OK
(LsiMptNw-SAS/Fibre/SCSI) Device List:

HBA ID LUN VENDOR PRODUCT REV SYNC WIDE QTAG IR P SCAN
----- -- --- --------- ----------------- ---- ---- ------ ---- ----- - ------
4 1 0 HP MSA2012sa J300 3Gb Serial Yes Y New
4 LSI Corpo SAS1068E 8 3Gb Serial New

Any Ideas ?

Regards,

Werner