Hello,

I'm running OpenSuse 11.0 (64 bit) with the Novell Linux Client 2.0 (64 bit.)

When I login to my eDirectroy tree, the loggin works fine, the login script runs partialy and then stops while the drives are being mapped. I usually get 3 drives mapped (all 3 resides on the same node) but when it tries to map 1 more drive (which is on another node) the script stops/freeze and I get a kernel oops (text pasted at the end of this message).

The system is a OES 1 (NetWare 6.5) 2 nodes cluster.

Once the script stops, I have to kill 3 Novell "runscript" program to get the script window out of the way. The funny thing is that the 3 drives that have been mapped are fully accessible. The bad thing is that I'm unable to acces the 4th drive which was not mapped.

Just to confirm that this should work, I have OpenSUSE 10.3 (32 bit) and the Novell Linux Client 2.0 (32 bit) on my laptop and the login script runs completely, all drives are being mapped, and the script window closes normally.

Anyone else having this problem?

Thanks,
Sylvain


BUG: unable to handle kernel paging request at 0000005400000000
IP: [<ffffffff88488d2f>] :novfs:novfs_daemon_lib_ioctl+0x850/0xb05
PGD 102060067 PUD 0
Oops: 0002 [1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/net/eth0/statistics/collisions
CPU 0
Modules linked in: novfs snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device iptable_filter ip_tables ip6table_filter ip6_tables x_tables ipv6 binfmt_misc microcode firmware_class fuse loop dm_mod ata_generic snd_hda_intel rtc_cmos snd_pcm snd_timer ppdev usbhid parport_pc rtc_core sr_mod i2c_i801 snd_page_alloc ide_pci_generic snd_hwdep rtc_lib parport floppy sg serio_raw hid dcdbas cdrom i2c_core e1000e ide_core snd intel_agp button soundcore ff_memless sd_mod ehci_hcd uhci_hcd usbcore edd ext3 mbcache jbd fan pata_acpi ata_piix libata scsi_mod dock thermal processor
Pid: 3855, comm: map Tainted: G N 2.6.25.18-0.2-default #1
RIP: 0010:[<ffffffff88488d2f>] [<ffffffff88488d2f>] :novfs:novfs_daemon_lib_ioctl+0x850/0xb05
RSP: 0018:ffff8101020d3db8 EFLAGS: 00010216
RAX: 0000005400000000 RBX: ffff81011fdb49c0 RCX: 000000000000002c
RDX: 0000002800000002 RSI: ffff81011fdb49c0 RDI: ffffffff884939dd
RBP: ffff8101020d3e68 R08: ffff81011fdb49ec R09: ffffffff884a3620
R10: ffff81000100d280 R11: 0000000000000000 R12: ffff81011421e2c0
R13: 0000000000000000 R14: ffff81011fdb49c0 R15: ffff81011fdb49ec
FS: 00007faa3071b700(0000) GS:ffffffff80632000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000005400000000 CR3: 0000000102091000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process map (pid: 3855, threadinfo ffff8101020d2000, task ffff81010c9142c0)
Stack: ffff81011421e2ec 00007fff38738e10 000000004a54103c 000000000000006a
0000000000627360 000000000000006a 0000000000627360 ffffffff8020bad3
000003e809030001 0000001800000011 0000002900000041 ffff81010ad1c46c
Call Trace:
[<ffffffff802df142>] proc_reg_unlocked_ioctl+0xb7/0xd7
[<ffffffff802acada>] vfs_ioctl+0x2a/0x78
[<ffffffff802acd6f>] do_vfs_ioctl+0x247/0x261
[<ffffffff802acdde>] sys_ioctl+0x55/0x77
[<ffffffff8020bffa>] system_call_after_swapgs+0x8a/0x8f
[<00007faa2f7e1b67>]


Code: 20 49 39 46 20 73 18 49 8b 06 4c 89 60 08 49 89 04 24 4d 89 74 24 08 4d 89 26 e9 c1 01 00 00 49 8b 46 08 4d 89 34 24 4d 89 66 08 <4c> 89 20 49 89 44 24 08 e9 a8 01 00 00 48 c7 c7 25 3a 49 88 31
RIP [<ffffffff88488d2f>] :novfs:novfs_daemon_lib_ioctl+0x850/0xb05
RSP <ffff8101020d3db8>
CR2: 0000005400000000
---[ end trace 59629e120ec17afe ]---