BM3.6
I am having a heck of a time getting this to work. I must be writing
my
exceptions wrong, but I'm not sure what it is I'm doing wrong. This
particular product requires a one to one relationship with a routable
ip
address, so I've set up NAT with a routable ip on the public side
going to
the ip of the workstation on the private side. I've added the
secondary
ipaddress at the console. I've determined that this work station is in
fact
using that ip address. I then set up the filter exceptions as the
documentation that I have said they should be (I think). It looks like
it
try's to establish the VPN, but at the last stage it drops.

Here is the port info that they have given me..
500/UDP Traffic / Inbound Only
5067/UDP Traffic / Inbound Only
5068/UDP Traffic / Outbound Only
5069/TCP Traffic / Outbound Only
2745/TCP Traffic / Outbound Only
2749/TCP Traffic / Outbound Only
2750/TCP Traffic / Outbound Only

Can someone help me out with the filter exceptions please?

tia
Wade Pedersen