Two weeks ago I installed NW 5.1 and BM 3.7. I already installed NW 6
and
BM 3.7 sometimes but could not fix the NDPS printer problems I had. So

switched back to NW 5.1 cause I already have a server which runes just

fine both BM 3.7 as NDPS.

On the NW 5.1 server I applied all patches like advised at this site:

http://nscsysop.hypermart.net/bmgrptch.html#nbm37

But still I seem to have some serious problems with BM 3.7 I keep
getting
the messages:

21-08-2003 9:37:44 : PROXY-3.71-
8
Novell Proxy encountered a fatal error: Detected a Freed IP Cache

Node:
0x1510BF1C, Original Freer = 0xC8963B1B

I had the same problem with NW6 but after some patches and I believe
some
tcp tweaking I solved the problem.

Some facts:
Cache volume is 9 GB has 8 KB blocks no file compressing no block
suballocation.
Starting proxy with CC does not resolve the Freed IP Cache Node
messages.

Yesterday the server crashed with an abend:

Server LDKSRV1 halted Thursday, 21 August 2003 3:34:22,435
Abend 1 on P00: Server-5.00k: Page Fault Processor Exception (Error
code
00000000)

Registers:
CS = 0008 DS = 0010 ES = 0010 FS = 0010 GS = 0010 SS = 0010
EAX = 65724620 EBX = 16EE5004 ECX = 16EE5004 EDX = FC5398FC
ESI = 39393731 EDI = 00000000 EBP = 1DAD9A64 ESP = C91D2F58
EIP = C86A5862 FLAGS = 00010046
C86A5862 8B500C MOV EDX,[EAX+0C]=?
EIP in PROXY.NLM at code start +000C1862h
Access Location: 0x6572462C

The violation occurred while processing the following instruction:
C86A5862 8B500C MOV EDX,[EAX+0C]
C86A5865 890D009953FC MOV [SERVER.NLM|WorkToDoListTail]
=SERVER.NLM|WorkTo
DoListHead,ECX
C86A586B 42 INC EDX
C86A586C C70100000000 MOV [ECX],00000000
C86A5872 89500C MOV [EAX+0C],EDX
C86A5875 FB STI
C86A5876 C3 RET
PROXY.NLM|CLockIncrement:
C86A5877 8B442404 MOV EAX,[ESP+04]
C86A587B F0FF00 (LOCK) INC dword ptr [EAX]
C86A587E C3 RET

Running process: Server 14 Process
Created by: NetWare Application
Thread Owned by NLM: SERVER.NLM
Stack pointer: C91D2F80
OS Stack limit: C91CB040
Scheduling priority: 67371008
Wait state: 3030070 (Yielded CPU)
Stack: C862DD75 (PROXY.NLM|ReturnRequestBlock+155)
--16EE5004 ?
<cut>
C85F7E0D (PROXY.NLM|DNSProxyUDPCallBackWorkToDo+5D)
--16EE5004 ?
<cut>
FC1072AB (SERVER.NLM|StartWorkToDo+2B)
--1DAD9A64 ?
<cut>
FC007DD4 (SERVER.NLM|WorkerThread+94)
--1DAD9A64 ?
<cut>
FC01F7A2 (SERVER.NLM|TcoNewSystemThreadEntryPoint+26)
--C9B34200 ?
<cut>
Stack dump exceeded the valid memory limit
Additional Information:
The CPU encountered a problem executing code in PROXY.NLM. The
problem may be in that module or in data passed to that module by a
process owned by SERVER.NLM.

There is a lot more please let me know if you need more to draw your conclusion.


Please help.

Regards,

Stefan Jippes
stefanjippes@hilfertsheem.nl