I am try to set up a second BM server for testing and fall-back
purposes.
Proxy services work as expected but NAT and filtering do not work as expected when testing.

I've added a secondary IP address to the 2nd BM server, but I'm unable
to
access REMOTELY this secondary IP address NATed to an internal server
EVEN
with filters unloaded.

If I unload filters on both BM servers, I can ping the Public IP of
the
2nd BM server from the primary BM server BUT NOT the secondary IP on
the
2nd BM server. From the 2nd BM server I can ping the public interface
on
the primary BM server and all secondary IPs on the primary BM server

Both BM servers have the same default route of 216.23.61.161 (IP on
the
external CISCO public router) and the same static route to the
internal
gateway on the 10.10.0.0 subnet (10.10.1.1). The internal subnet
10.10.0.0 (255.255.0.0) on the internal router has a default route of

10.10.2.40 which is the primary BM server.

Thanks

Bill