Hi

I am using bordermanger as the router and the exchange server is on the
private side of the of the BM 3.8 system.

We recently hired an external company to do the spam filtering so I want
our server to only repsond to that companies SMPT requests. When I set
up the filters I was not able to connect out to anyones SMTP which our
server needs to do and the needed smtp traffic stopped. For now I have
the filters down.

Here are the two filters I created that I was hoping would do the trick

Source Interface Type: Interface
Source Interface: <All Interfaces>
Source Circuit:

Destination Interface Type: Interface
Destination Interface: <All Interfaces>
Destination Circuit:

Packet Type: smtp Protocol: TCP
Src Port(s): <All> Dest Port(s): 25
ACK Bit Filtering: Disabled Stateful Filtering: Disabled

Src Addr Type: Any Address
Src IP Address:
Dest Addr Type: Any Address
Dest IP Address:
Logging: Disabled
Comment: outgoing smtp filters


Source Interface Type: Interface
Source Interface: <All Interfaces>
Source Circuit:

Destination Interface Type: Interface
Destination Interface: <All Interfaces>
Destination Circuit:

Packet Type: smtpin Protocol: TCP
Src Port(s): 25 Dest Port(s): <All>
ACK Bit Filtering: Disabled Stateful Filtering: Disabled

Src Addr Type: Network
Src IP Address: 208.81.64.0/255.255.252.0
Dest Addr Type: Any Address
Dest IP Address:
Logging: Disabled
Comment: incoming smtp filter

Thanks,

Will