I have a 2 node OES2SP1 Linux cluster running. So far I have only 1 resource, a Large NSS volume that mounts and migrates properly. When I went to create a DHCP resource I found that no templates had been installed. Is there someway I can copy or re-install 'stock' templates?

What I've tried -

iManager > Clusters > Cluster Options
- I see MasterIP, 2 nodes, vol resource only - no templates

The docs say to look here, where I also don't see them
hq1a-s01-oesl:/var/opt/novell/ncs # dir
total 44
-rwxr-xr-x 1 root root 104 Feb 13 23:15 Master_IP_Address_Resource.load
-rwxr-xr-x 1 root root 100 Feb 13 23:15 Master_IP_Address_Resource.unload
-rwxr-xr-x 1 root root 256 Feb 14 10:07 WORK_SERVER.load
-rwxr-xr-x 1 root root 215 Feb 14 10:07 WORK_SERVER.monitor
-rwxr-xr-x 1 root root 221 Feb 14 10:07 WORK_SERVER.unload
-rw-r--r-- 1 root root 2875 Feb 13 22:08 cluster.xml
-rw-r--r-- 1 root root 231 Feb 13 22:08 gipc.conf
-rw-r--r-- 1 root root 65 Feb 13 22:05 hangcheck-timer.conf
-rw-r--r-- 1 root root 2340 Feb 13 22:08 nodes.xml
-rw-r--r-- 1 root root 90 Feb 15 08:37 resource-priority.conf
-rw-r--r-- 1 root root 3903 Feb 14 10:07 resources.xml

Thanks for any help in installing the templates
- Bruce