Dear all!
We have a big problem with NetWare 6.5 SP7 and Backup Exec 9.2.
Since the migration to a new hardware our backup is not running.

Hardware Details:
- Server: IBM x3650 7979
- Tape: Quantum LTO-3 HH, SAS-connected

Problem description:
The tape drive is recognized correctly under NetWare and Bachup Exec. Problem comes, when even trying to label a tape: ""Job completed: With ERROR - A drive failure was detected. (24623)". We also tried different tapes, also a different tape drive (which is working without problems while being attached to another (Win 2003) server).

Additional information:
- The nwtape.cdm we renamed, to prevent it from being started.
- CDMs and HAMs are from SP7.
- For Backup Exec, we are using the lastest driver package.
What is strange: we still have an "unbound object" when entering "list devices". But I do not have a clue, which driver is missing. Our startup.ncf:
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD IDECD.CDM
LOAD SCSIHD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10025
LOAD AACRAID.HAM SLOT=10030
######## End HAM Drivers ########
env NDSD_TRY_NMASLOGIN_FIRST=true
LOAD KEYB.NLM Germany
LOAD CHARSET.NLM CP850

Is there something missig in our startup.ncf (which may cause the backup problem)?
Any ideas, what we can do to make the backup run?

Thanks in advance,

chobbes