Anyone using these laptops in their organization?

We can PXE boot into the zenworks imaging menu, but are unable to see the drive controller to image the laptop. Doesn't show any partition information in the zenworks imaging gui.

Storage controller info output from zenworks boot cd:

#hwinfo --storage-ctrl
20: PCI 1f.1: 0101 IDE interface
[Created at pci.305]
Unique ID: 3p2J.GMn5xKx5jYF
SysFS ID: /devices/pci0000:00/0000:001f.1
SysFS BusID: 0000:00:1f.1
Hardware Class: storage
Model: "Dell IDE interface"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x811a
SubVendor: pci 0x1028 "Dell"
SubVendor: pci 0x02b1
Revision: 0x06
I/O Ports: 0x1810-0x181f (rw)
Module Alias: "pci:v00008086d0000811Asv00001028sd000002B1bc01sc0 1i80"
Driver Info #0:
Driver Status: generic is active
Driver Activation Cmd: "modeprobe generic"
Config Status: cfg=new, avail=yes, need=no, active=unknown

I am completely inexperienced at adding drivers to the pxe boot image for zenworks but am willing to try if I new that was the issue.

There is absolutely no information about this laptop and its compatibility with Zenworks 7 imaging on any google search.

Thanks in advance.