Hi:

Thanks a lot for taking the time to even read this post.

Using OES 2 SP1 with a LeftHand iSCSI SAN, after reboot, my iSCSI target is lost after rebooting. I've tried TID 3778731, but with no change.

Below are extracts from logs:

==========
boot.msg
==========
Loading NSS pools
Starting adminusd daemon
Mounting _admin volume
Starting jstcpd daemon
Mounting all NSS volumes in /etc/fstab
mount: wrong fs type, bad option, bad superblock on MIGRATE,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

Error 32 occured while mounting volume MIGRATE
Unable to mount the volume
Starting volmnd daemon
Starting ncp2nss daemon
NSS is running!

==========
dmesg
==========
NSS: Clearing the NSS private cache for a pool
NSSLOG ==> [MSAP] comnLog.c[201]
Pool "IT_POOL" - MSAP activate.
Server(e63cef32-d90f-1000-83-2e-0015605e4622) Cluster(00000000-0000-0000-00-00-000000000000)
NSSLOG ==> [MSAP] comnLog.c[201]
Pool "IT_POOL" - Watching pool.
NSSLOG ==> [Upgrade] zlssUpgrade.c[3223]
ZLSS upgrade thread started.
NSS: Clearing the NSS private cache for a pool
NSSLOG ==> [MSAP] comnLog.c[201]
Pool "MATTHEW_POOL" - MSAP activate.
Server(e63cef32-d90f-1000-83-2e-0015605e4622) Cluster(00000000-0000-0000-00-00-000000000000)
NSSLOG ==> [MSAP] comnLog.c[201]
Pool "MATTHEW_POOL" - Watching pool.
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 253:6: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
NSSLOG ==> [Error] comnVol.c[3014]
Mar 3, 2009 8:47:54 pm NSS<COMN>-4.10b-660:
Volume MIGRATE not found. Verify Media, Devices, Drivers and power
to subsystem. Try NSS /Activate=MIGRATE and or type NSS /volumes and
verify spelling of the volume
Volume Change State failed. Error = 20801

My manual workaround is to rcopen-iscsi restart, then nssmu | Partitions | hit enter on SAN partition, then nsscon | NSS /Activate=MIGRATE.

I've tried ravsui verify and rebuild on the Pool, but to no avail. I've also tried creating NSS vols with different names and in different ways, i.e., using nssmu and iManager.

Any thoughts?

Thanks again.

Bill




Bill Scully

Senior Network Engineer and Administrator
Trinity International University
Information Technology