NW 6, SP4
BM 3.8, SP1

Utilization is at 99-100% and checking busiest threads shows NWMKDE.NLM.
I also get a message in the logger screen stating "Cannot complete
the "add" operation, code=0x2002e. Make sure the correct options are
specified when loading Btrieve." I cannot find any reference to the
error code 0x2002e but it looks like Btrieve corruption so I followed the
instructions in TID #2933360 and after the reboot the utilization goes
down to normal but then in a few hours the 0x2002e message comes back and
utilization goes up again with NWMKDE being the busiest thread. HELP
PLEASE!

-Alain