I am in the process of setting up a new Border manager server and ran
into an issue getting it to work with DSL. I was hoping to get some help.
The DLS provider does not require that I use PPOE, they have assigned up
4 addresses to use. I was able to ping internal addresses but not
external addresses. I was not able to ping the gateway. I have a Linksys
router in place so I basically copied all of those settings. I thought
the pulic NIC might be bad so I reversed the cards and still could ping
internal but not external from the server. I also double checked the lan
static route to make sure that was setup as per the TIDS.
I should be able to use DLS correct?
Oh, Netware 6 Sp3. Bordermanager 3.6.