Hello,

I'm trying to reload a nw6.5 sp6 cluster.

After loading the OS, I'm using NNSMU to go into the HBA Device and change the 'Sharable for clustering' from 'No' to 'Yes'. If I exit NSSMU and open it again, the Sharable is still YES, If I reboot the server and go back in, it's back to 'NO'

anyone have any suggestions? Thank you!


On a testing note, I tried using nw6.5 sp7 and it will stay sharable. But I'm not allowed to use sp7 in our corp network.

Maybe something is wrong with my startup.ncf?
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD CPQSHD.CDM
LOAD IDECD.CDM
LOAD SCSIHD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10022
LOAD HPQCISS.HAM SLOT=10032

######## Added for SAN Failover###
SET MULTI-PATH SUPPORT = ON


LOAD QL2X00.HAM SLOT=1 /LUNS /ALLPATHS /PORTNAMES /MAXLUNS=32 /LINKDOWN=2 /PORTDOWN=2 /XRETRY=400
LOAD QL2X00.HAM SLOT=2 /LUNS /ALLPATHS /PORTNAMES /MAXLUNS=32 /LINKDOWN=2 /PORTDOWN=2 /XRETRY=400


#LOAD QL2X00.HAM SLOT=1 /LUNS
#LOAD QL2X00.HAM SLOT=2 /LUNS
######## End HAM Drivers ########